전체상품목록 바로가기

본문 바로가기



현재 위치

  1. 게시판
  2. 자료실

자료실

자료실입니다.

게시판 상세
제목 [AVMATRIX] PVS0615 레코딩 관련 업그레이드 V14_2
작성자 제이씨미디어몰 (ip:)
  • 작성일 2021-03-19 16:03:22
  • 추천 추천하기
  • 조회수 174
평점 0점

녹화 업그레이드 단계

1 단계 : FAT32 형식의 4G SD 카드를 준비하여 비디오 스위처의 SD 카드 슬롯에 삽입하십시오. 만약

SD 카드의 남은 용량을 올바르게 확보 할 수 있으며 카드를 사용하여 업그레이드 할 수 있습니다. 당신이 할 수없는 경우

확인한 후 다시 포맷하거나 다른 SD 카드를 교체하십시오.

업그레이드하기 전에 시스템 설정을 입력하고 펌웨어 버전 번호를 확인한 후 기록하십시오. 네 번째

하단은 녹화 프로그램의 버전을 나타냅니다 (xx-xx-xx-xx-xx-06-xx-xx-xx. 06은 v06을 나타냄)

녹음);

2 단계 : "V14_uboot"디렉토리 아래의 "u-boot"파일을 SD 카드의 루트 디렉토리로 복사하고 업그레이드

갈라져.

업그레이드 방법 :

비디오 스위처의 전원을 끕니다.

SD 카드를 비디오 스위처에 넣고 SD 카드 슬롯의 녹색 LED 표시등 인 비디오 스위처를 다시 시작하십시오.

깜박임은 진행중인 업그레이드를 의미합니다. LED가 깜박임을 멈출 때까지 약 15 초 동안 기다립니다.

멀티 뷰에서 SD 카드의 용량을 감지하면 업그레이드가 성공합니다.

3 단계 :

SD 카드를 제거하고 SD 카드의 파일을 삭제 한 다음 "rootfs"및 "u-boot"파일을

"V14_upgrade"디렉토리를 SD 카드의 루트 디렉토리로 바꾸고 함께 업그레이드하십시오.

업그레이드 방법 :

비디오 스위처의 전원을 끕니다.

SD 카드를 비디오 스위처에 넣고 SD 카드 슬롯의 녹색 LED 표시등 인 비디오 스위처를 다시 시작하십시오.

깜박임은 진행중인 업그레이드를 의미합니다. LED가 깜박임을 멈추고 남은 용량이 될 때까지 약 3 분 동안 기다립니다.

SD 카드의 멀티 뷰가 멀티 뷰에서 감지되면 업그레이드에 성공한 것입니다.

버전 번호는 "14"입니다 (예 : xx-xx-xx-xx-xx-12-xx-xx-xx).




Recording Upgrade Steps

Step 1: Prepare an 4G SD card in FAT32 format and insert it into the SD card slot of the Video Switcher. If the

remaining capacity of the SD card can be acquired correctly, the card can be used to upgrade. If you cannot

identify it, please re-format it or replace another SD card.

Enter the System Settings before upgrading, check the firmware version number and record it. The fourth from

the bottom represents the version of the recording program(xx-xx-xx-xx-xx-06-xx-xx-xx. 06 represents v06

recording);

Step 2: Copy the "u-boot" file under the "V14_uboot" directory to the root directory of the SD card and upgrade

separately.

Upgrade method:

Power off the video switcher.

Insert the SD card into the Video Switcher and restart the Video Switcher, the Green LED light of SD card slot

flashing means upgrade in process. Wait about 15 seconds until the LED stops flashing, and the remaining

capacity of the SD card can be detected in the multi-view, then the upgrade is successful;

Step 3:

Remove the SD card, delete the files in the SD card and copy the "rootfs" and "u-boot" files under the

"V14_upgrade" directory to the root directory of the SD card and upgrade together.

Upgrade method:

Power off the video switcher.

Insert the SD card into the Video Switcher and Restart the Video Switcher, the Green LED light of SD card slot

flashing means upgrade in process. Wait about 3 minutes until the LED stops flashing, and the remaining capacity

of the SD card can be detected in the multi-view, then the upgrade is successful.

The version number is "14", for example: xx-xx-xx-xx-xx-12-xx-xx-xx.


첨부파일 Recording Upgrade V14_2.zip
비밀번호 삭제하려면 비밀번호를 입력하세요.
관리자게시 스팸신고 스팸해제
목록 삭제 수정 답변
댓글 수정

비밀번호 :

수정 취소

/ byte

댓글 입력

댓글달기이름 :비밀번호 : 관리자답변보기

확인

/ byte

왼쪽의 문자를 공백없이 입력하세요.(대소문자구분)

회원에게만 댓글 작성 권한이 있습니다.


장바구니 0

맨위로